Hampton Bay AC851-INCT-D Manuál s instrukcemi stáhnout pdf

INSTALLATION INSTRUCTIONS

FOR HAMPTON BAY DUAL MOUNT LIGHT FIXTURES

NOTE: READ AND SAVE ALL INSTRUCTIONS!

NOTE: This is a dual use light kit that allows you to install it to the ceiling as a light fixture. It also provides the

feature of being convertible to install directly to a Hampton Bay ceiling fan. Please read this manual thoroughly

and follow the steps below for a correct and safe installation.

A. Wire nuts (2)

B. Hanger bracket

C. ground wire

D. 8/32" screws (2)

E. 8/32" Nuts (2)

F. Canopy (4)

G. Decorative nuts (8)

H. Upper cap (4)

I. Light fixture

J. Glass shade

K. Lower cap (4, w/ grommet hole)

L. Lower cap (4, no grommet hole)

M. Finial (4)

N. 13Watt compact fluorescent bulbs (2)

A. CEILING LIGHT FIXTURE INSTALLATION:

WARNING

To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box

before beginning.

All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical

installation should be performed by a qualified licensed electrician.

This fixture must be mounted to an approved outlet box that is directly supported by the building

structure.

This light kit will only fit on fans with a center plug in the switchcap including Hampton Bay models

Huntington and Farmington. If any questions, please call 1-877-898-1881 for assistance.

STEP 1: Locate and tread the two 8/32" screws supplied

in the pack into the hanger bracket threaded holes as

shown in Figure 1.

STEP 2: Locate and install the two 8/32"nuts on the 8/32"

screws and tighten until properly against the hanger

bracket.

STEP 3: Attach the hanger bracket on the outlet box using

the two screws supplied with the outlet box. Tighten the

two screws on the outlet box securely. Leave the wires

exposed coming from the outlet box as shown in Figure 2.

Figure 1

Figure 2

8/32" screws

8/32" Screws

Hanger

bracket

Hanger bracket

8/32" Nuts

Outlet box

mounting screws

Supply wires

Model No.: 430-727

Vendor No.: 11289

UPC# 792145353027

1 2 3 4

Shrnutí obsahu

Strany 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS FOR HAMPTON BAY DUAL MOUNT LIGHT FIXTURESNOTE: READ AND SAVE ALL INSTRUCTIONS!NOTE: This is a dual use light kit that allows

Strany 2 - Figure 5

STEP 4: Lift up light fixture to make wires connection. Please refer to Figure 3 and 4. Note: make sure the power is off. 1. Select appropria

Strany 3 - Figure 7

B. CEILING FAN LIGHT KIT INSTALLATION:WARNINGTo reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fu

Strany 4 - Figure 10

C. INSTALLATION OF LIGHT KIT TO FANS WITH REMOVABLE SWITCH CAUTION: Make sure power is removed from the fan before attempting to install the light kit

Komentáře k této Příručce

Žádné komentáře

Hampton Bay AC851-INCT-D Manuál s instrukcemi

Procházejte online nebo si stáhněte Manuál s instrukcemi pro Pracovní světla Hampton Bay AC851-INCT-D. Hampton Bay AC851-INCT-D Instructions / Assembly Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Pracovní světla Hampton Bay AC851-INCT-D